Basic Instructions on how to Make a Cast
The process for making casts is very simple and even if you have never done it before you should have no problems making one.
Below are some simple instructions and pictures showing you the process so you can see how easy it is.
Step 1
Mix the moulding powder with water from the cold tap until it is well mixed, this is made easy by the moulding powder changing colour so you know which stage you are at.
Step 2
Transfer the moulding material into a suitable container to make the casting in.
Step 3
Insert your childs limb into the moulding material until its sets approx 2-3min.
Step 4
Gently remove your child’s limb and you will be left with an impression ready to be cast.
Step 5
Mix and pour the casting stone then leave to set for about 12 hours.
Step 6
Peel away the moulding material.
You will be left with a beautiful exact replica of your child’s limb all ready to be displayed however you want.
So there you have it.
It is really that simple and if you have any problems I am more than happy to help you out as much as I can.